Corrugated Chiller System Recycle Water

Corrugated Chiller System Recycle Water

Recycle water for singleface cooling jacket using evaporative or refrigerated closed loop cooling system.

Increase corrugator productivity by maintaining constant flow of chilled water through the cooling jacket, while preventing gel build-up in gluing

applicators.

FOR MORE INFORMATION ON THE CORRUGATED CHILLER SYSTEM PLEASE VISIT: http://www.kandrequip.com/corrugated_chiller.html

TO VIEW ALL WE HAVE TO OFFER PLEASE VISIT: http://www.kandrequip.com

The Ultra Folder Model 2660

The Ultra Folder Model 2660

The Ultra Folder is a high-speed, stream-feed folder-gluer at an affordable price.

A combination of feed rolls and vacuum belts gives positive control of the blanks through the machine, insuring quality folding and gluing. The Ultra Folder is available with a cold set adhesive applicator and a shingling compression sector on wheels. This permits operation of folder-gluer at right angles for squaring RSC's or straight line for tubes.


FOR MORE INFORMATION ON THE ULTRA FOLDER MODEL 2660 PLEASE VISIT:
http://www.kandrequip.com/corrugated_folder.html

TO VIEW ALL WE HAVE TO OFFER PLEASE VISIT: http://www.kandrequip.com/

Belt Keeper

Belt Keeper

By lessening the need for increased belt tension, due to slippage or tracking, the K&R Belt Keeper lowers your overall maintenance dollars.

Keeps your belt from slipping on the head pulley lagging.

Keeps your belt breathing by applying steam to the inside and not the paper side as found in conventional showers.

Keeps warp to a minimum.

Keeps maintenance dollars in your pocket by extending the life of your belt and bearings. Keeps your belt clean (when used with the K&R belt brush).

FOR MORE INFORMATION ON THE BELT KEEPER PLEASE VISIT: http://www.kandrequip.com/corrugated_beltkeeper.html

TO VIEW ALL WE HAVE TO OFFER PLEASE VISIT: http://www.kandrequip.com/

Engraved Roll Type Wax Applicator

Engraved Roll Type Wax Applicator complete wax control Ssystem

Apply wax to a medium or liner. Floor or bridge mounted available. K&R's Engraved Roll Type Wax Applicators have been tested and proven in the corrugated industry, using a straight paraffin was at temperatures between 200 and 220 degrees.

The K&R Engraved Roll Type Was Applicator offers the corrugated industry a complete wax control system for a combined board. This control is acheived by applying wax to a single web not combined board.

FEATURES:

- Uniform coverage at any speed
- No clean up problems
- No operator adjustments
- No web saturation during stops

FOR MORE INFORMATION ON THE ENGRAVED ROLL TYPE WAX APPLICATOR PLEAS
VISIT: http://www.kandrequip.com/corrugated_wax_applicator.html

TO VIEW ALL WE HAVE TO OFFER PLEASE VISIT: http://www.kandrequip.com/